HOW DO YOUR BELTS WORK?
Click play to see a brief 1.5" gun belt demonstration video.
Click play to see a brief 1.5" gun belt demonstration video.
Our tactical nylon gun belts are about twice as stiff as our leather gun belts. They are intentionally designed this way to accommodate full-size firearms and heavier gear. Like all track belts, they are constructed using 3 layers; an outermost layer
Our standard 1.5" leather gun belts are made using two pieces of Top-Grain leather. (1.5" wide & 5.5 mm thick). One piece on the front of the belt, one on the back, both stitched together with a poly-core (polyurethane and nylon blend) center for add
The difference is the style of the buckle face and the finish.Everything else, including the mechanism, is identical. Our gun buckles come with a gunmetal, or black powder-coated, nickel, or brass finish. All of our X-series gun buckles are compatibl
Please see the Gun Belt Compatibility Guide below to determine which buckles and belt straps are compatible.
Kore Essentials USA made gun belts use high-grade, US-made nylon webbing. Kore USA made Gun Belts also feature Gorilla Webbing™ that's 50% tougher versus traditional webbing to prevent stretching, fraying or breakage.
1.5" (3.7 cm) wide gun belts are approximately 5 mm thick. 1.75" (4.5 cm) wide Garrison gun belts are 5.5 mm thick.
The track is made out of a tough nylon material that is virtually indestructible. It's very, very rare that one ever breaks and it has never been an issue.
If it's solid stainless steel buckle you can use a fine piece of micro cloth with soap and water and rub the area gently. That should do the trick. If your buckle is an alloy, unfortunately there's no remedy. We do not replace buckles that were scrat
To trim your 1.5" Gun Belt or 1.75" Garrison Gun Belt to size, follow the instructions or video below. *These instructions are not for Dual Belt Systems. For Battle Belts, Duty Belts, Competition Belts, and Executive Protection Belts please refer to
Yes, Kore 1.5" Gun Belts are desgined for IWB, OWB, and Appendix Carry.
Kore Reinforced 1.75" wide Garrison Gun Belts are designed for the range, law enforcement, and field training. Garrison belts are extra stiff, to go beyond the demands of our smaller everyday carry belts. The belt has a hidden track system that featu
All X-Series buckles can be used for appendix carry. The X7, X9 and X10 buckles were designed specifically for appendix carry and feature a smaller buckle face. The X10 buckle is a retailer exclusive buckle only available at retail locations. Please
The belt receptacle clamp (teeth) can be a little hard to open and close initially, but they do get easier with time. To close, or clamp the belt into the teeth receptacle, make sure the screws are not tightened. The clamp will not fully go down when
The belt is not broken. Do not panic or do something unnecessary like cut the belt off. If the strap feels stuck, slightly push the strap further in to the buckle to relieve the tension, then use the release tab. The belt cannot release when the tens
Armortek is a proprietary, manmade, super-fiber that’s engineered to outperform and outlast traditional leather. It has a leather-like feel, but features increased durability, stretch and recovery properties.
We recommend going with the XL size (up to 54") if you are worried our standard size belt will not fit. Our XL belts are the same price and material, but they allow you to cut the belt from 24" to 54". In other words, both sizes can be cut down as fa
Yes, the X3 buckle is completely nickel free. All other buckles contain a small amount of nickel.